4/22/2013

NAT Type 2 port forwarding D-LINK router, the PSVITA

Except for the old router, router D-LINK is possible in much the same procedure. However, you can not escape from the NAT Type 3 When it is router two networks, you can find this article. After you find that there are two routers, you must create a port forwarding settings.
To open the configuration screen of a broadband router, type the following URL in the browser of your PC. Even PS3 and PSVITA, open the router setup screen, you can add the configuration changes.
  • http://192.168.0.1/ or http://dlinkrouter/

Login screen, you can log in by selecting the "admin" from the pull-down menu.

Open the status of the router menu. Is present in the table and on the Internet, find the IP address.

The numbers say is present in the table and the Internet, the first digit of the IP address is "10 or 172 or 192" is, can not open port. It is not possible to switch to NAT type 2.
For example, if you find IP address, the 192.168.1.2 is present in the table and the Internet, there is a possibility of the two routers. In this case, switch to the access point mode the D-LINK router, please open port on the router to the original.
Others, IP address, for example, is present in the table and the Internet, if you find any 172.0.0.2 and 10.0.0.2, and is in the private IP address of the network port can not be open on IP address. Therefore, it has no way to switch to NAT type 2.
Look at the description below, PSVITA users of those other, can be switched to NAT type 2. DMZ is simple to set up the most. However, I will explain in the individual port.
First, find the static IP address of the PSVITA. IP address, 192.168.0.50. Subnet mask, 255.255.255.0. Default router, 192.168.0.1. Primary DNS, 192.168.0.1. Secondary DNS, 0.0.0.0.
Then this is the port forwarding settings of D-LINK, but the method has a few parting. Since the port forwarding screen Listings sample about two types, please refer to it. Menu screen for setting, add the set to "virtual server" or "port forwarding".
Is the port forwarding menu.

Is a virtual server menu.

The port number type necessary NAT type 2 switching. "TCP 80/443/3478/3479/3480/5223/8080". UDP "3478/3479/3658/49152-65535".
  • Name,any1
  • IP Address,192.168.0.50
  • Publick Port,80-80
  • Private Port,80
  • Trafick Type,TCP
  • Name,any2
  • IP Address,192.168.0.50
  • Publick Port,443-443
  • Private Port,443
  • Trafick Type,TCP
  • Name,any3
  • IP Address,192.168.0.50
  • Publick Port,5223-5223
  • Private Port,5223
  • Trafick Type,TCP
  • Name,any4
  • IP Address,192.168.0.50
  • Publick Port,8080-8080
  • Private Port,8080
  • Trafick Type,TCP
  • Name,any5
  • IP Address,192.168.0.50
  • Publick Port,3480-3480
  • Private Port,3480
  • Trafick Type,TCP
  • Name,any6
  • IP Address,192.168.0.50
  • Publick Port,3658-3658
  • Private Port,3658
  • Trafick Type,UDP
  • Name,any7
  • IP Address,192.168.0.50
  • Publick Port,49152-65535
  • Private Port,49152-65535
  • Trafick Type,UDP
  • Name,any8
  • IP Address,192.168.0.50
  • Publick Port,3478-3479
  • Private Port,3478-3479
  • Trafick Type.Any
Click the save at the end.

The following is a description of the port forwarding entry of a different version.
  • Name,any1
  • IP Address,192.168.0.50
  • TCP,80
  • UDP,Blank
  • Schedule,Default
  • Name,any2
  • IP Address,192.168.0.50
  • TCP,443
  • UDP,Blank
  • Schedule,Default
  • Name,any3
  • IP Address,192.168.0.50
  • TCP,3480
  • UDP,Blank
  • Schedule,Default
  • Name,any4
  • IP Address,192.168.0.50
  • TCP,5223
  • UDP,Blank
  • Schedule,Default
  • Name,any5
  • IP Address,192.168.0.50
  • TCP,8080
  • UDP,Blank
  • Schedule,Default
  • Name,any6
  • IP Address,192.168.0.50
  • TCP,3478-3479
  • UDP,Blank
  • Schedule,Default
  • Name,any7
  • IP Address,192.168.0.50
  • TCP,Blank
  • UDP,3478-3479
  • Schedule,Default
  • Name,any8
  • IP Address,192.168.0.50
  • TCP,Blank
  • UDP,3658
  • Schedule,Default
  • Name,any9
  • IP Address,192.168.0.50
  • TCP,Blank
  • UDP,49152-65535
  • Schedule,Default

Click the save at the end.

If, if you do not switch NAT type When you add the above settings, please disable the SPI service.

By all means, If you do do not buy paulownia to NAT-type 2. I'm sorry, please contact to D-LINK support.

4 comments:

  1. Help. I can't log in. And my ps vita is in nat type 3. please help. My d'link dir 300 Firmware Version : 1.08

    ReplyDelete
    Replies
    1. Upgrade ur router version

      Delete
  2. i do not understand.....i have a dlink DIR516 model and when i try to play black ops 1 on ps3 it says the NAT type is moderate. so i cant connect to anybody.help would be nice but i see the comment above hasnt gotten an answer so i would assume i wont either :(

    ReplyDelete
  3. Switch is a gadget used to forward information parcels starting with one goal then onto the next. Many organizations create distinctive sorts of switches to help Corporate and in addition home clients. https://customercaretoll.com/listings/d-link-customer-support-toll-free-phone-number

    ReplyDelete