5/15/2012

How to check MAC Address or IP address of the Windows7 VISTA

How to check the (physical address) MAC address and IP address of "Windows7 Windows VISTA"

IP addresses are also referred to as the path name. If you want to share a file on the computer, are also used to check the IP address of Windows with a shared folder, shared folder from within the LAN to access the other, for example. For example, 192.168.1.2 is the PC path of the shared folder. You will be able to access the shared folder by typing the name and path "\ \ 192.168.1.2" To access the shared folder from another PC.It is also used to open port of course. As the name of the destination path.

You can check to launch the command prompt, type the ipconfig command. To start the command prompt, you can start and type cmd and then click Enter key, to start the search box

IP address to use port forwarding is displayed on the results of the ipconfig (Enter), is the IPv4 address.

C:\Users\ka\Desktop>ipconfig

Windows IP Configuration

Ethernet adapter Wired Ethernet Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::103f:b15f:1491:d6ea%12
IPv4 Address. . . . . . . . . . . : 192.168.2.101
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1

You can find out by appending a "ipconfig / all" to confirm the class ID (physical address) MAC address.The symbol ** to enter a hexadecimal number. Has hidden symbols for safety.

C:\Users\kagemaru1\Desktop>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : kagemaru
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : GW-USEco300
Physical Address. . . . . . . . . : 00-**-**-**-**-FB
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

To exit the command prompt, press the Enter key and then type exit.

4 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. This comment has been removed by a blog administrator.

    ReplyDelete
  3. This comment has been removed by a blog administrator.

    ReplyDelete
  4. Grato pelos esclarecimentos!

    ReplyDelete