5/01/2012

D-link DIR-655 Port Forward

D-link DIR-655 Input description of Port Forwarding

Download Manual DIR-655 / DIR-655_REVB
Gigabit Router is REVB

Please see below first if you are in trouble if the game machine

Communication is impossible to remove the content first "SPI Firewall" in the PSP and PSVITA and PS3. No, please that the lead in then reconnect.

To open the setting screen of the Router. Please remove the SPI Firewall to open the Firewall Advanced Settings from the menu. Most online game should lead in this.

You must have the status of the Router prior to input information

See the setup screen Enter this key input into the browser address http://192.168.0.1/

User Name is Admin Does not have a password (not required)

The old DIR-655 authentication code character input. Same password is required.

Can see the screen. Open the Device Info on status to the beginning

Connect PPPoE type, there is no problem. Please input port as it is open. DHCP users will see the following description of the type Connect

WAN IP address of the beginning of the table, you can not open port 's 192(192.168.1.2)/172(172.0.0.2)/10(10.0.0.2). You can not change the NAT Type 3 also also PSVITA PS3. Cause I think that you have a private IP address or Internet Router upstream.

WAN IP address of the beginning of the table, the user does not have 192/172/10 can open port

Open the Advanced menu. Open the port forwarding on the left

Input information to the Port Forwarding.

  1. name:Anything good (any)
  2. IP Address:This is the IP address of the PC to open ports (sample 192.168.0.2)
  3. Ports to Open:TCP or UDP Input port number
  4. (Schedule & Inbound Filter) will remain the default
  5. Click the Save Settings button when you can input

Sample MPO port Forward. Port number of the MPO, you can create a room in one of the open ports 5730-5739 for UDP. Input the following content. IP address of the PSP from the computer you can choose what type or name of the ship.

  1. name:mpo
  2. IP Address:sample 192.168.0.3
  3. Ports to Open:UDP 5730 or 5730-5739
  4. (Schedule & Inbound Filter) will remain the default
  5. Click the Save Settings button when you can input

Configuration Guide DMZ. If you want to open port is difficult, to NAT Type 1/2 of the PS3, please the DMZ.

Note DMZ user. Can not use port forwarding note

Open the Advanced Settings to open the Firewall

Check on the Enable DMZ

Click Save Settings to input the IPAddress of the PS3 that you want to change to 1/2 or NAT IPAddress type of computer you want to open port DMZ IP Address.

No comments:

Post a Comment